m8ta
use https for features.
text: sort by
tags: modified
type: chronology
{1435}
hide / / print
ref: -0 tags: Na Ji 2p two photon fluorescent imaging pulse splitting damage bleaching date: 02-19-2019 00:01 gmt revision:2 [1] [0] [head]

PMID-18204458 High-speed, low-photodamage nonlinear imaging using passive pulse splitters

  • Core idea: take a single pulse and spread it out to N=2 kN= 2^k pulses using reflections and delay lines.
  • Assume two optical processes, signal SI αS \propto I^{\alpha} and photobleaching/damage DI βD \propto I^{\beta} , β>α>1\beta \gt \alpha \gt 1
  • Then an NN pulse splitter requires N 11/αN^{1-1/\alpha} greater average power but reduces the damage by N 1β/α.N^{1-\beta/\alpha}.
  • This allows for shorter dwell times, higher power at the sample, lower damage, slower photobleaching, and better SNR for fluorescently labeled slices.
  • Examine the list of references too, e.g. "Multiphoton multifocal microscopy exploiting a diffractive optical element" (2003)

{1384}
hide / / print
ref: -0 tags: NET probes SU-8 microfabrication sewing machine carbon fiber electrode insertion mice histology 2p date: 12-29-2017 04:38 gmt revision:1 [0] [head]

PMID-28246640 Ultraflexible nanoelectronic probes form reliable, glial scar–free neural integration

  • SU-8 asymptotic H2O absorption is 3.3% in PBS -- quite a bit higher than I expected, and higher than PI.
  • Faced yield problems with contact litho at 2-3um trace/space.
  • Good recordings out to 4 months!
  • 3 minutes / probe insertion.
  • Fab:
    • Ni release layer, Su-8 2000.5. "excellent tensile strength" --
      • Tensile strength 60 MPa
      • Youngs modulus 2.0 GPa
      • Elongation at break 6.5%
      • Water absorption, per spec sheet, 0.65% (but not PBS)
    • 500nm dielectric; < 1% crosstalk; see figure S12.
    • Pt or Au rec sites, 10um x 20um or 30 x 30um.
    • FFC connector, with Si substrate remaining.
  • Used transgenic mice, YFP expressed in neurons.
  • CA glue used before metabond, followed by Kwik-sil silicone.
  • Neuron yield not so great -- they need to plate the electrodes down to acceptable impedance. (figure S5)
    • Measured impedance ~ 1M at 1khz.
  • Unclear if 50um x 1um is really that much worse than 10um x 1.5um.
  • Histology looks realyl great, (figure S10).
  • Manuscript did not mention (though the did at the poster) problems with electrode pull-out; they deal with it in the same way, application of ACSF.